User manual

DAS Front Panel Explained
(1) (2) (3)
(1) Input select button (toggles through inputs).
(2) AS LED (Audio Server input selected).
(3) DI LED (Digital S/PDIF input selected, D IN on the rear panel).
The selector switch on the front panel cycles through the inputs. By pressing and releasing this button, you
can toggle through the inputs, audio server (AS), S/PDIF input D in (DI) and then back to AS etc... Audio
server (AS) is the default turn on selection.
DAS Rear Panel Explained
(2) (3) (6) (7)
(1) (4) (5) (8)
1. The DAC output is a fixed line level output straight from the DAC. DO NOT CONNECT STRAIGHT
TO A POWER AMP!
2. HDMI should be connected to a CEC enabled TV, using a CEC enabled cable.
3. LAN allows the Audio Server to be networked and accessed through the network, web server, tablet
and smart phone.
4. Factory reset button.
5. D IN is an S/PDIF input, selected through the front panel as the DI selection.
6. USB are two USB ports mainly used for external storage devices. DO NOT CONNECT A 2.5 INCH
USB POWERED HDD to these ports.
7. Power switch.
8. Mains power input and Fuse.
Page 6