User manual

Audio Server Software Update
See section CAAS Audio Configuration Set Up below.
CAAS Audio Configuration Set Up
The DAS network settings can be configured under Programs → CAAS Audio Configuration. This
procedure is outlined below:
1. Switch the DAS ON, once the audio server has booted.
2. On the TV, scroll right and select the Programs menu; this should give you a list of programs.
3. Scroll down to and select CAAS Audio Configuration; this will open the configuration window.
4. The configuration window has two parts (tabs), Network Configuration and Software Updates.
5. On the Network Configuration page, you can configure either:
◦ Ethernet (Hard Wired) or Wireless (WiFi).
◦ Whether the IP address is fixed or comes from DHCP (Dynamic Host Configuration Protocol).
◦ If you are not using DHCP, IP address, subnet masks and gateway addressed can all be
configured.
6. On the Software Update page, you can select: Check for software upgrade, once selected the
DAS will search for any software upgrades. It is recommended to follow the on-screen advice during
the upgrade process and it is recommended that you do NOT reboot or power off the unit during an
upgrade procedure.
Note: Please refer to your router manual for further details about configuring DHCP and changing device IP
addresses should you need to.
Returns, Repairs and Weee recycling
For returns, repairs or Weee recycling, please contact CAAS Audio at [e-mail] or via the
contacts page on our website www.caasaudio.com
Page 24