User manual

3. Enter the following:
◦ Name: CAAS Audio Server
◦ Host or IP: Enter the DAS IP address (recommended), see notes below. Also you may be able
to enter the host name here “caasaudio” although this may not work with a lot of routers.
◦ HTTP API: 80 (NOT 8080 as shown above)
◦ Username: (keep blank)
◦ Password: (keep blank)
4. Click Done
Notes:
• The DAS IP address will pop up in the right hand bottom corner of the TV on DAS boot up (the DAS
must be networked first for this to happen and a TV connected to the DAS HDMI port).
• The DAS IP address can also be found by using the App Fing on your smart phone / tablet.
Alternatively if CEC is enabled on your TV, you can use the TV remote to scroll to System →
System info where the IP address will be displayed.
• Keep the login and password blank, they are not needed.
• The DAS needs to be running before you configure Official XBMC Remote.
Adding a Host at a later time
You can add a host / connect to the DAS at any time by navigating as follows:
1. On an iPhone:
◦ Menu → Settings → Manage XBMC Hosts.
2. On an iPad:
◦ At the bottom of the screen you should see a box that reads No connection.
◦ Click on the No connection box and the New server screen should pop up (see below).
◦ Select Find XBMC.
◦ The App should auto-detect the DAS and fill in the IP address and port.
◦ If the auto-detect does not work or finds the wrong host, then press and fill in each box manually.
◦ Click Save.
◦ Then select the host you want from the list and you should be connected (see below).
Page 18