User manual

Installing Official XBMC Remote on an Apple Device
We only recommend Official XBMC Remote for an Apple (iOS) platform. We have designed using Official
XBMC Remote and can not guarantee successful operation with other Apps.
Note: The following procedures may differ slightly from device to device.
The Official XBMC remote App can be installed by performing the following steps:
1. Make sure the DAS is networked.
2. Download (from the App store) and install Official XBMC remote on your iOS (Apple) smart device.
3. Open / Run Official XBMC remote on your smart phone or tablet.
4. Once installed and running you should see the following screen (this will differ slightly for an iPad).
5. You'll be notified that there are No hosts detected.
6. On an iPad: Select Add Host (it will be at the bottom of the box) and then select Find XBMC.
7. On an iPhone: Select Settings.
8. The App will then automatically find XBMC hosts on your network.
9. If the correct host has been found (XBMC (caasaudio)) then Click Save.
10. Then select the appropriate host from the list (XBMC (caasaudio)) and you should be connected.
If Auto-detect fails to find the correct host then the information will need to be entered manually, as follows:
1. Click on Manually add a host and dismiss the error message if you get it again.
2. You will see a form where you can define how to connect to XBMC on the Audio Server (see below).
Page 17