Operating Manual

i) Take out the bracelet body and the Material Velcro
Strap from the box and assemble the strap as below:
ii) To turn the device on, press the Red button until the LED
lights either a fixed Green colour if the bracelet battery is
charged or flash Yellow if it needs charging.
iii) Its recommended to charge the bracelet for 2 hours before
use. Take out the USB Cable and plug into the Bracelet to
charge it in a USB port. The LED light will flash Green
during charging and be fixed Green when fully charged.
iv) Once fully charged the C9T Bracelet is ready to use.
To use the C9T Bracelet
2
(1)
(2)
(3)
(4)