5.
Product Overview Thank you for purchasing our 5.5 inch Full HD touch screen monitor. This monitor has HDMI input and output, auxiliary power output, touch screen menu operation, support user 3D LUT upload, etc. It has small size, simple operation, portable convenience and wide application range. Advanced features include Histogram, Embedded Audio, Focus Assist, False Colors, Over Exposure, Center Marker, Safe Frames, Ratio Marker, Check Field, Image Freeze, Zoom, Anamorphic etc.
● In order to better maintain the LCD screen and protect the cover, please follow the following ways to avoid damages. 1. Please refrain from using the hard objects to hit the screen. 2. Please do not force to wipe the screen. 3. Please do not use the chemical solutions to clean the screen. 4. Please do not spray any detergent on the screen. 5. Please do not write on the screen directly. 6. Please do not stick on the screen. 7. Please simply wipe with a clean soft cloth and make sure no water on the screen.
● Pixel to Pixel ● Ratio Marker, Safe Frames and Center Marker ● Brightness, Contrast, Sharpness, Tint, Saturation and Color Temp Adjustment. ● 3.5mm earphone output ● DC 8.4V power out to power your DSLR camera or mirrorless camera ● External sunshade, sunlight readable CONTENTS 1. Product Description ----------------------------------------- 4 1.1 Button Instruction --------------------------------------------- 5 1.2 Port Instruction (Bottom) ------------------------------------ 5 1.
1.
1.1 Button Instruction Function when OSD is not Function when OSD is displayed displayed F1 Custom button F1 / F2 Custom button F2 / Decrease the volume or Decrease or adjust value of backlight selected parameter Increase the volume or Increase or adjust value of backlight selected parameter Display OSD Main menu Return to previous OSD menu ∨ / Select next menu item ∧ / Select previous menu item Button ＜ ＞ MENU Power On/Off button 1.2 Port Instruction (Bottom) DC OUT 8.
LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon. : 3.5mm earphone port output DC IN 5V (Type-C): Type-C power input. It is recommended to be used for local power supply only. It is not recommended to connect other devices to provide loop-out power. 1.3 Port Instruction (Left) HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz. HDMI OUT: V1.4, HDMI signal output, up to 4K@30Hz.
1.4 Power Supply Way (1) The rear cover of the monitor is equipped with a F970 battery plate, which is applicable to F970 series of batteries. ● Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series. It is recommended to use standard original F970 battery. When using battery power supply: two power output interfaces (DC OUT 8.4V interface and external install and power kit) can be connected to other device.
1.5 Sony F970 Install and Power Kit A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmitter, LED light, video converter and others which can be powered by Sony F970 battery. The kit has two cross grooves, you can adjust the position of the external device by loosening 2 screws up and down / left or right, or install the kit upside down.
(3) Steps to remove the kit: ①. Loosen the 2 screws. ②. Use both hands to move the kit up. ③. Move the round holes to the corresponding 2 screws. (You can also install the kit upside down.) ④. Then gently lift the kit upwards and carefully disassemble the 2P power cord. ⑤. Then remove the 2 screws.
1.6 Mount Points (1) ¼-20 Thread Points There are (4) ¼-20 thread points (top, bottom, right side & Back center) can be easily connected to the hot shoe mount, tripod fixed installation. (2) Tilt Arm Mounting The monitor secures to your camera using the included Tilt Arm via shoe mount or 1/4"-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle.
1.7 Sunshade ① Sunshade ② Sunshade Frame ③ Fixed Frame ④ Sunshade Application First lock the Sunshade Frame ②with the monitor tight ③. Open the sunshade ①, and match the sticker on the sunshade inside to the marked part of the sunshade frame ②, smooth and press 3 sides on the sunshade, and then complete the sunshade installation ④.
2. Menu Operation Instruction After the monitor is correctly connected to the power supply, the indicator light is on (red), long press (manual power-on mode), turn on the monitor, the indicator light turns yellow, and after the HDMI signal is input, the indicator light turns green. (The default is auto power-on mode, no need to long press buttons.) (1).
(2) Button Menu Operation ①．When the menu is not displayed, directly press the "<" or ">" button to adjust the volume or backlight. You can set the left and right buttons in the menu Left Right Key Set to set the volume or backlight. ②．Press the "MENU" button to open the main menu (on the left side of the screen), press "∨" or "∧" to select the secondary menu, press ">" to enter the secondary menu, and then press "∨" or "∧" to select the secondary menu Menu options.
3. Menu Function Instruction Histogram Off, On Focus Assist Off, On Peaking Color Red, Green, Blue Embedded Audio Off, On Over Exposure Off, On Exposure Level IRE10～IRE100 Check Field Off, Mono, Red, Green, Blue False Colors Off, On Nine Grid Safe Frames Center Marker Ratio Marker Off, On Off, 80%, 85%, 90%, 93%, 96%, 2.35:1 Off, On Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.
Scan Mode Aspect Ratio Under Scan, Over Scan Auto., 4:3, 16:9, Just Scan, Panorama, P2P Off, 1.3X, 2.0X, 2.0X MAG, User Anamorphic Under the User, the Anamorphic nX can be customized. Anamorphic nX 1.20X~2.00X Off, On Open the Nine Grid function in the to divide the image into nine grid, then turn on the Nine Grid Zoom function, select one of the screens by pressing the "<" or Nine Grid Zoom ">" key, and then press the "∨" or "∧" key zoom in to full screen.
OFF, ON Lut Switch After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG). Lut Table Show the 4 built-in Lut and the custom load Lut After copying the 3D LUT file to the U disk and inserting Lut Import (type C) it into the TYPE-C to USB Connector, you can click the “<” or “>” key in the Lut Import(type C) to import the 3D LUT file. 6500, 9300, User Color Temp. Under the User, the red, green and blue of the image can be adjusted.
Volume, Backlight You can set the Left Right Key Set as shortcut keys for Left Right Key Set volume or backlight adjustment. After setting, when the menu is not displayed, you can directly press the "<" or ">" key for quick adjustment. Language English, 简体中文, Español, Português, Français, Nederlands, Deutsch,日本語, 繁體中文 OSD Trans.
Reset Press “＞” button to confirm, back to original setting. Safe Frames, Check Field, Focus Assist, Aspect F1/F2 Ratio, Image Flip, Image Freeze, Histogram, False Colors, Over Exposure, Embedded Audio, Nine Grid, Zoom, Anamorphic, Center Marker 4. Technical Parameters Panel Size 5.5” touch screen Resolution 1920 × 1080 pixels Dot Pitch 0.0639 (H) × 0.
HDMI Input/ Output Support Format 480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (30/29.97/25/24/23.98) 4096×2160p (24Hz) Power Input Voltage 7～24V Power Consumption ≦9W Unit Size (mm) Unit Weight Mount Points 148Lx93Hx20D (mm) 245g (with F970 install and power kit) ¼-20 thread points Working Temperature -20℃～50℃ Storage Temperature -30℃～60℃ 5. Trouble Shooting 5.
■ If there are still other problems, please contact with our related technologists. ★ As we are improving product features and product performance, so if there is any change on the specification without prior notice.
