Multi-Function Converter w/CATV Tuner & PIP Model: 40972 Operation Manual
Operational Manual Multi-Function Converter w/CATV Tuner & PIP Converts a CRT or LCD computer monitor to a television set Model: 40972 Thank you for purchasing the Multi-Function Converter w/CATV Tuner & PIP. We hope that you will be pleased with the functionality and capabilities that this converter offers. We recommend that you read this manual thoroughly and retain for future reference. Function: The imaging method of a CRT or LCD monitor is quite different from a television set.
Table of Contents Functions ………………………………………………………………………….ii Package Contents………………………………………………………………...ii Features……………………………………………………………………………1 Connecting the Converter…….…………………………………………………..1 Operating the Multi-Function Converter…………………………………………4 Troubleshooting…………………………………………………………………..10 Specifications……………………………………………………………………..10 Replaceable Parts………………………………………………………………...
Features: • Plug ‘n’ Play: No software required • Full Channel Selection for CATV up to channel 125 • 4 output resolutions, 1024X768, 800X600, 640X480, 852X480 (Mac) • Stylish Design, can place upright (stand included) or horizontal • Full-function remote control • Front panel AV and S-Video inputs; Rear panel VGA in/out and 3.5mm audio in/out • Adjustable TV function: brightness, hue, color, etc.
Rear Panel CABLE IN F (or IEC) connector for CATV signal input Video Output Only operates in TV mode SPEAKER CONNECTION 3.5mm Stereo connection for speakers or amplifier AUDIO IN 3.
To connect a source device – If your video source has a composite video output, follow these steps: 1. Connect the 3-RCA patch cable to the output of your; game, DVD, VCR, etc. (pay special attention to color coding; YELLOW for video, WHITE for left audio and RED for right audio). 2. Connect the other end of RCA patch cable to the “Video/Audio Input” on the front panel of Multi-Function Converter (paying attention to color coding). If your video source has a S-Video output, follow these steps: 1.
Operating the Multi-Function Converter Remote control functions VOL+/-: Volume Control CH+/-: Channel up/down Power: TV/PC mode selection MTS (NTSC) Second Audio Program Select INPUT: Source selection between different sources MUTE: Mute key for audio muting CH+/-: channel up/down (only valid in TV/CATV mode) Volume Control: Volume Control for TV, Video, S-Video Select: selection key (should work with “MENU” key) EXIT: exit key (for use with the “Menu” key) MENU: Setting of TV function Numeric Key:
Operating the Multi-Function Converter con’t (1) MTS When you are watching a CATV Program, use this button to select the audio output mode. (Please note: not all the CATV Programs are broadcast in MTS STEREO) Press “MTS” Press “MTS” (2) Power When the power is switched “ON”, the Multi-Function Converter operates in CATV mode. When the power is switched “OFF” the Multi-Function Converter will pass through PC video.
(5) Channel +/Press + for channel up or - for channel down. Please note these keys only operate in CATV MODE Press (6) Navigate/Select These keys navigate the “MENU” to make adjustments. (7) VOL +/Adjusts the listening level of the audio you hear. + for volume up, - for volume down. Please note these keys only operate in CATV MODE (8) MENU Adjustment of the Multi-Function Converter, there are 6 selections available, MENU 1.Input 2.Picture 3.TV Function 4.Resolution 5.OSD Function 6.Language 7.
3. TV Function There are 6 adjustments available within this function. To make an adjustment, highlight the item you want to adjust, press the “Select” key on the remote and make the adjustment. Å key to adjust lower, Æ to adjust higher. TV System Æ “CATV” Channel EditÆ “Add”, “Erase” 2 selections Fine Tune: Fine tuning the TV frequency, MTSÆ MONO, STEREO, SAP Full Scan: Scan the available television channels Channel Scan: Scan television Channels with internal frequency map MENU 1. Input 1.TV system 2.
MENU 1. Input 1.OSD Position 2.Picture 2. OSD Color 3.TV Choose OSD then 4.Resolution “Select”, 2 items show 5.OSD 6.Language 7. Reset 6. Language: There are 2 adjustments available within this function. To make an adjustment, highlight the item you want to adjust, press the “Select” key on the remote and make the adjustment. Å key to adjust lower, Æ to adjust higher. 1. English 2.Chinese 7. Reset Select this function to bring the Multifunction Video Converter to original factory settings.
(15) 9 Channels Preview Please note: This function is only valid in TV mode only You can preview up to 9 channels. To select a channel from the preview, press numeric key 1-9 or press a numeric key twice to cancel. TV mode Press this key 9 Channel Preview press a numeric key (0-9) to view the channel shown in 9 channels (16) Sleep Press the SLEEP key to active the sleep timer. This will turn the unit off after the pre-set time. 1. 5 min 2. 10 min 3. 15 min 4. 30 min 5. 60 min 6. 90 min 7.
Troubleshooting: Problem No picture Solution 1. Compare all connections to the appropriate illustrations to verify correct connectivity. 2. Make sure the power adapter is connected to the electrical supply and the converter. 3. Make sure that the selected mode is the same as the input signal, and then perform Auto Scan. No sound 1. Compare all connections to the appropriate illustrations to verify correct connectivity. No response while using the remote control 1.
Impact Acoustics™ One Year Warranty At Impact Acoustics, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 877-AV-EXPERT or www.impactacoustics.com.
