Instruction Manual

CASCADING THE SPLITTER
The HDMI outputs on the rear panel of the splitter are capable of being split up to three levels. This can be
referred to as cascading or daisy-chaining. With the two-way splitter, you can take one source device (DVD
player, satellite or cable receiver, etc.) and split it so that you can connect up to eight televisions/monitors at
the same time. With the four-way splitter, you can have your source device going to sixteen
televisions/monitors by cascading or daisy-chaining. To connect your devices, do the following:
Step 1
Make sure that your HDMI enabled device and televisions/monitors are turned off.
Step 2
Using an HDMI cable no longer than 10m, connect your source device’s HDMI output to the input of the first
splitter.
Step 3
From the outputs of the first splitter, use two HDMI cables no longer than 15m to connect to two different
HDMI splitter inputs.
Step 4
From each of those HDMI splitters use four HDMI cables (two for each splitter) no longer than 15m to
connect to four additional splitter inputs
Step 5
From those four splitters you can now use eight HDMI cables no longer than 15m to connect to eight
televisions/monitors (two televisions/monitors from each splitter).
10