4 x 2 HDMI™ Matrix Switch Model: 40444 Operation Manual ver 1.
Operation Manual 4 x 2 HDMI™ Matrix Switch 4 inputs and 2 outputs for flexible audio/video distribution Model: 40444 Thank you for purchasing the Matrix Switch. We recommend that you read this manual thoroughly and retain for future reference. Function: Simultaneously route any 4 devices to your choice of two monitors/displays, or deliver one signal to both displays.
Table of Contents Functions …………………………………………………………………………...ii Package Contents……………………………………………………………….....ii Features……………………………………………………………………………..1 Connecting the Matrix Switch …………….…….………………………………...1 Operating the Matrix Switch......…………………………………………………… Operating the Matrix Switch with the remote control............................2 Operating the Matrix Switch from the front panel.................................2 Operating the Matrix Switch via RS-232………………………………...
Features: • Supports up to 1080p Supports 480i, 480p, 720p, 1080i, 1080p resolutions • Slim Line Remote Control Operate the switch from a distance or program commands into your existing remote control system • Blue LEDs Blue LEDs to enhance appearance and match existing equipment in your system • RS-232 Control Capability Seamlessly integrate this unit into an existing home automation system • Infrared Extension Jack Extend the reach of IR signals for remote control Connecting the 40444 HDMI 4 X 2
Operating the Matrix Switch from the Front Panel 1. Power on the switch via remote control or RS-232 control (Note: There is no power switch on the front pane of the switch.) 2. The front panel includes two sets of input/output selectors for each TV. Press and release the selection button to scroll through the inputs until the appropriate display is achieved. For example to switch from input #1 to input #3, press the selection button two times.
Operating the Matrix Switch via RS-232 control Transmission Format: Baud Rate: 57600 BPS Data Byte: 8 bits Parity: None Stop Bit: 1 Flow control: None Modem Cable Pinouts: Pin 1 2 3 4 5 6 7 8 9 Switcher End Definition Pin 1 2 3 4 5 6 7 8 9 NC TxD RxD NC GND NC NC NC NC Command Code Controller End Definition NC RxD TxD NC GND NC NC NC NC 0x01 Description TV 1 Output Port On 0x02 0x05 0x06 0x07 0x08 0x09 TV 2 Output Port On CH 1 Input Port On CH 2 Input Port On CH 3 Input Port On CH 4 Input Port On T
Attaching Rack Mount Hardware This switch may be installed in a standard equipment rack. Simply attach the included mounting hardware to the sides of the switch and affix the assembly to the rack.
Problem Solution No Power Make sure power source is operational No Sound 1. Make sure all connections are secure 2. Make sure all audio equipment is on proper settings No Picture 1. Make sure all connections are secure 2. Check the front panel of the switch to see if the proper input by color code has been selected 3.
Replaceable Parts In the event of a lost or damage part, the following replaceable accessories are available. Please call 1-800-506-9606 for order information. IR Remote Control 98029 AC/DC Adapter 98028 Cables To Go™ One Year Warranty At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device.
