User Manual

ManualsBrandsC2G ManualsAccessories for video40312 DVI-D Monitor SPLITTER_EXTENDER

1

2

3

4

5

6

7

8

9

6

One DVI-D male to male (M/M) cable is

required to connect from the Video Splitter

input to a computer’s DVI-D output. Multiple

monitors should be connected to the Video

Splitter’s output ports as shown below with

DVI-D cables.

The ACTIVE LED turns on when there is a

video signal at the Input port. The POWER

LED turns on when the Video Splitter is

powered up by the DC 9V power adapter.

Figure 1: 40312 Connection Diagram

DEVICE INSTALLATION