Manualshelf

Owner's manual

ManualsBrandsC2G ManualsAccessories communication29596 WIRELESS USB TO VGA AND AUDIO KIT
31323334353637383940
39
4. Enter the PIN of the Wireless VGA Device Adapter (4-digit PIN) and click Accept Association. The
Wireless VGA Device Adapter and Wireless USB Host Adapter are now associated and ready for
operation.
5. Repeat Steps 1-4 to PIN associate the TruLink Wireless Audio Device Adapter.
PIN CHANGE PROCEDURE
The default PIN setting for the Wireless VGA and Audio Device Adapters are “1234”. This section gives
you the instructions to change the PIN to another 4-Digit value.
IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.
1. Make sure your Wireless USB Host Adapter and the Wireless VGA/Audio Device Adapter are not
connected to your computer.
2. Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB
Manager\Utility\PINUpdate). The following dialog will appear:
APPENDIX