Owner's manual

16
The first step is to connect the cables to the WDSDS Transmitter and Receiver, and to the
players, monitors, speakers and PC. The entire configuration can be done from the PC via a
wired LAN network.
1. CONNECT THE LAN CABLES.
Connect the WDSDS Transmitter and Receiver to the PC using LAN cables.
2. CONNECT THE DISPLAY CABLES
Connect the player to the Transmitter, and connect the monitors to the Receivers.
3. CONNECT THE AUDIO CABLES
Connect the player to the Transmitter, and connect the monitors/speakers to the
Receivers.
4. POWER ON
Turn on the Transmitter/Receiver, PC, player, monitors and speakers.
5. START VIDEO OUTPUT FROM THE PLAYER
Output a video from the player. If it is impossible, output a screen adjustment video
that is created on the Transmitter. (For details, refer to Chapter 4 Video/Audio
Distribution and Maintenance). When outputting a video from the player, use a still
image (white or any other light colors).
CONNECTION EXAMPLE
An example WDSDS network connection is shown below:
3.2 CREATE ENVIRONMENT FOR SETUP