USER GUIDE VGA MONITOR SPLITTER/EXTENDER Model: 29503 (2-Port) / 29504 (4-Port) 1
TABLE OF CONTENTS Introduction......................................................................................................................................................2 Features...........................................................................................................................................................3 System Requirements.....................................................................................................................................
INTRODUCTION Thank you for purchasing the TruLink VGA Monitor Splitter/Extender. The TruLink VGA Monitor Splitter/Extender enables you to simultaneously distribute a VGA signal to two or four video displays, while boosting the signal up to 210 feet. The device is powerful yet easy to use, with no software or complicated interface cards to install. Simply connect monitor cables and power it on.
FEATURES Color-Coded Connectors - HD15 Female Input (1), HD15 Female Outputs (2) or (4) Durable All-Metal Housing Power-Saving Mode No Software Required Transmission distance of up to 210 feet Suitable for XGA, SVGA, VGA, and Multi-Sync monitors Daisy-Chain multiple units together to support additional displays 350MHz Video Bandwidth 1920 x 1440 @80Hz Maximum Resolution 3
SYSTEM REQUIREMENTS A system with an HD15 VGA video card (1 qty) male to male HD15 cable* (for splitter to computer) (2 qty) (29503) or (4 qty) (29504) male to male HD15 cables* (for splitter to monitors) *UXGA cables recommended for higher resolution applications 4
PACKAGE CONTENTS 29503 Package Contents (1) 2-Port VGA Monitor Splitter/Extender 9V AC Power Adapter User Guide 29504 Package Contents (1) 4-Port VGA Monitor Splitter/Extender 9V AC Power Adapter User Guide 5
DEVICE INSTALLATION One HD15 male to male (M/M) cable is required to connect from the Video Splitter input to a computer’s VGA output. Multiple monitors should be connected to the Video Splitter’s output ports as shown below with HD15 cables. The ACTIVE LED turns on when there is a video signal at the Input port. The POWER LED turns on when the Video Splitter is powered up by the AC 9V power adapter.
TECHNICAL SPECIFICATIONS Function 29503 29504 Number of VGA output 2 4 Signal bandwidth 350MHz Signal type VGA, SVGA, XGA, Multi-sync LED POWER (green) x 1 ACTIVE (amber) x 1 Cable length 65M (210ft) Max.
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-506-9607 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
10
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.10.9.
