User manual

49
software on a laptop. If you have questions and the ReadMe
file does not help, please refer to C-Pen Windows
Software Help or your laptop retailer or manufacturer.
To install C-Pen Windows Software:
1. Put the C-Pen Windows Software CD into your
computer’s CD-ROM drive and the installation
program will start automatically.
2. If the installation does not start, open the Start menu in
the Windows taskbar, select Run and type d:\setup.exe,
where d: is the drive letter for your CD-ROM drive.
3. To install C-Pen Windows Software, click on Install C-Pen.
If no Infrared drivers are installed on your computer,
click on Install Infrared to install these (Windows 95 and
98 only).
The installation program also enables you to view the
C Pen Demo, which demonstrates how you should use
C Pen for best results. To play the demo, click on Demo.
To open the ReadMe file, click on ReadMe.
Connecting C-Pen to a PC
To connect C-Pen to your PC, position C-Pen so that it is
aligned with the PC’s IR port as shown in the figure.