User manual

45
In the calibration dialog box, select DONE to go back or
DEFAULT SETTING to revert to the factory setting. If you
press the scan button (Trigg), a calibration will start.
You can do a calibration whenever you use C-Pen. This
method increases C-Pen’s reading ability if the text is not
black and/or the background is not white. Inverted text
must still be set in Text Quality. Remember that red text
is not possible to read. If the calibration does not improve
the reading accuracy, return to the default setting.
C Write Feedback
Check the box if you want to enable the visual feedback
facility in C Write.
System Settings
PIN CODE You can control the access of your
C-Pen by a four-digit PIN code. Enter
the PIN code setting to enable or disable
your PIN (Personal Identification
Number).
When the dialog box opens, the zero in
the first position is blinking. Turn Nav to
select the first digit in your PIN. Then
press Nav to go the next position.
Continue in the same way. When you
have reached OK, press Nav and
confirm the PIN in a new dialog box.