User manual

26
Basic rules when using C Write
• In order to obtain maximum accuracy when writing
with C-Pen, your characters should resemble the pro-
totypes on the following pages as much as possible.
• A character must be drawn in one single stroke.
• The dot indicates the starting point of the stroke.
• The height of the character should be 1 - 4 cm.
• Trigg must be pressed before you start writing.
• It is important that the pen tip is in contact with the
surface while you are writing.
• The writing surface must have a distinct pattern, such
as a printed text. Solid colors or simple repetitive
patterns (lines, squares, grids) should be avoided.
Capital letters
When you enter edit mode the status field will look like
this:
The edit mode symbol indicates that C Write will
generate lowercase letters.
In order to write a capital letter, you have to write the shift
sign first (see C Write Prototypes). Only the first letter
will be a capital. The status field will reflect this choice.
Start here
The edit mode symbol shows
the C Write Lowercase icon
C Write Capital letter icon