User manual

24
Select
Use the SELECT command to edit more than one charac-
ter at a time. Then select CHARACTERS and turn Nav to
mark multiple characters. Press Nav and choose CUT,
COPY or DELETE from the menu.
If you select ALL, the whole text will be selected.
Delete
Place the cursor to the left of the character you want to
delete and select DELETE from the menu.
If you have selected text, the whole selection will be
deleted, see Select above.
Settings
You can change text settings here. More detailed explana-
tions of the settings can be found in Settings, p. 42. The
text settings are
• TEXT LANGUAGE: Select the language of the text you
are reading.
• C WRITE FEEDBACK: Mark the checkbox if you want
the C Write visual feedback to be on. See p. 25.
• READ MODE: Select Continuous or Separate lines.
• TEXT QUALITY: Select Normal or Inverted.
• CALIBRATION: Select DEFAULT SETTING if your
C-Pen is calibrated and you want to revert to the
factory setting.
Quit Editing
Quit edit mode by selecting QUIT EDITING.