User`s manual

BX-PIB0x Embedded Box System
25
3. Insert a Phillips screwdriver into the hole on the side of the chassis and
remove the screw securing the PCI slot blanking plate. Remove the
blanking plate as shown by arrow “1”.
4. Insert the PCI/PCIe expansion card into the slot in the riser card as
shown by arrow “2”.
5. Secure the PCI/PCIe expansion card with the screw removed in Step 3
above. Replace the screws on the side of the chassis.
6. Replace the bottom cover of the chassis by reversing Steps 1 and 2
above.