User`s manual

BX-PIB0x Embedded Box System
22
2.4 Installing a 2.5” SATA Drive
CAUTION:
Before installing or removing a SATA drive, make sure the
system has been shut down and the power cord has been
unplugged.
1. Loosen the two large knurled screws securing the drive tray to the front
panel of the system and pull the tray out of the chassis.
2. Slide the 2.5” SATA drive into the drive tray with the bottom side facing
upwards as shown by arrow “1”. Secure the drive to the tray by securing
four screws (included in the accessory pack) as indicated by “2”.