User`s manual

BX-PIB0x Embedded Box System
15
2. Getting Started
The following chapter describes how to set up and operate the BX-PIB0x.
2.1 Preparation
Unpack the contents of the shipping carton. Please check that your package
contains the items below. If you discover damaged or missing items, please
contact your vendor.
 BX-PIB0x Embedded Box System
 AC-to-DC Adapter (90W, 100-240V 2.5A 50~60Hz in,
19VDC 4.73A out)
 Driver DVD
 Accessory pack
WARNING:
Do NOT install or apply power to equipment that is damaged or
if there is missing/incomplete equipment. Retain the shipping
carton and packing materials for inspection. Please contact
your dealer/vendor immediately for assistance. Obtain
authorization from your dealer before returning any product.
Place the system on a flat work surface. Ensure there is sufficient airflow
clearance around the chassis.
CAUTION:
To prevent damage to the system, ensure there is sufficient
clearance around the air vents for unrestricted airflow. The air
temperature inside the enclosure could rise above the specified
operating temperature limits if the airflow through the vents is
restricted.