User`s manual

User's ManualHS-6200
Controller
Circuit Braker
Options :
There are elevating leg rests as an option.
13
Leg Rests
The HS-6200 is equipped with a swing-away & detachable leg rests, which are height
adjustable. To adjust the height, remove the securing screws and nuts from each side
and slide the extension tube and leg rests up or down to the desired height. Retighten
the securing hardware as Fig. 27 shows
Figure 27
Figure 27
Figure 28
Figure 28
Figure 29
Figure 29
Never lift the wheelchair by the leg rests. These parts are detachable
and will not bear the weight of this chair. Lift this chair ONLY by non-
detachable parts of the main frame.
P
Q
1.Directional movement is attained by controlling the
joystick (P) ; move the joystick toward the direction
intended. HS-6200 is without turning limitation, it can
circle 360 degrees without problem.
1.
When the electric circuit is overloading or malfunctioning
the Circuit Braker will automatically shut off the main
power of the chair to ensure safety in performance.
Pressing down the button (Q) should restore mobility.