User`s manual

User's ManualHS-6200
Figure 18
Figure 18
J
K
Figure 19
Figure 19
J
K
Freewheel levers
For your convenience, C.T.M. HS-6200 is
equipped with two free wheel levers. These
levers allow you to disengage the drive motors
and maneuver the chair manually.
1.In travelling, set the two metallic levers
(J.K) to the Drive position.
2. When the chair stops or malfunctions
you can push the levers (J.K) to the
Neutral position so the chair is movable
by human force.
SPECIAL FEATURES
11
DO NOT use your chair while the drive motors are disengaged unless
you are in the presence of an attendant! DO NOT disengage the drive
motors when your chair is on an incline. The chair could roll down on
its own, causing injury!
To engage or disengage the free wheel feature:
1. Turn the free wheel levers outward, to engage the drive motors. (See Fig. 18)
2.
Turn the free wheel levers inward to disengage the drive motors. (See Fig. 19)
It is important to remember that when your HS-6200 is in freewheeling
mode, the braking system is disengaged
Armrest
The height adjustable T-type armrest is provided as standard equipment on the chair.
Adjustment for the HS-6200 is facilitated by a thumbscrew fitted from the outside of the
armrest support at the lower end. T
o activate the thumbscrew simply loosen and remove
it from the locating hole. (See Fig 20.)
The Armrest is liftable by pulling the pin outward. (Figure 21)
Figure 20
Figure 20
Figure 21
Figure 21