Service manual

_______________

DISPLAY PANEL

APPLICATOR OPTIONS:

The applicator option menu will let you view and choose which options you’ll be using in a particular

application. For example: If you have a loose loop configuration, simply select the loose loop option and

press the HOME key to take you back to the main menu.

Option choices: Loose Loop Low Label Multiple Label

Imprinter Web Break Missing Label

Crossover Tamp Switch Skip Counter

OPTION INCOMPATIBILITY

In some instances, applicator options are incompatible with one another because they are functionally

different. In other cases they share hardware or software resources. When the operator attempts to enable

an option, the applicator will disable some options automatically or will prompt the user to disable another

option before proceeding. The following table illustrates what options are incompatible with others:

Active Option or Mode Disabled Option(s) or Mode(s)

Leading Edge

Crossover Loose Loop

Skip Counter

Imprinter Loose Loop

Label Profiling Multi-Label

Crossover

Missing Label

Leading Edge Multi-Label

Label Profiling

Skip Counter

Loose Loop Crossover

Imprinter

Missing Label Leading Edge Apply

Multi-Label

Label Profiling

Multi-Label Leading Edge Apply

Missing Label

Powered Rewind Imprinter

Loose Loop

Skip Counter Crossover

Tamp Switch Web Break

Web Break Tamp Switch

NOTE: The different options are covered in detail in the setup section.