Specifications

Instruction BookletHS-290

RE-ASSEMBLING YOUR SCOOTER

To assemble scooter, you can repeat the disassembly direction in reverse. Abbreviated

directions are given below. Refer to the Figures on pages 1

1 - 12 to locate parts.

1.Connect rear section to front section of scooter together with a guide pin to lock in place.

And attach two cables together underneath. Make you push lever in place to latch both

sections together.

2.Pull up Tiller Angle Adjustment lever to lock tiller into its upright position.

3.Place front basket.

4.Place battery pack in battery compartment.

5.Place seat on seat post and pulling Seat Rotation Lever upwards to putting down seat

into seat post then tighten seat lock knob to secure.