Instruction manual
The Detector Drifts
out
of
Tune
(a)
Temperature drift caused
by
the change in air temperature when a
machine is moved from a house or a car into the open.
(b)
The greater the change
in
temperature the more the drift, and up
to
30
minutes
may
be
needed for the electronic circuitry
to
acclimatize itself.
(c)
Sometimes battery drain can cause drift of signal. Replace batteries and
this should help
to
maintain a stable signal.
If
you
experience any difficulty in operating your PROMET 3, or have any
questions on the information
in
your PROMET 3 Operating Instructions
FURTHER
INFORMATION
manual, please do not hestitate to phone our Customer Services Department
on
(0233)
629181.
Before returning a
detector
for
repair to C-Scope ensure you have
done the following:-
(a)
Read instructions thoroughly.
(b)
Tried
new batteries and checked procedure outlined above.
(c)
Speak
to
local dealer about performance of the detector, especially
if
you
are still unfamiliar with metal detectors
in
general.
Return detector with letter giving full details of fault.
;..
I
...
11