Service manual

GE Medical Systems SIGNA PROFILE CONFORMANCE STATEMENT
REV 2.7 sm 2303347
doc ver 2.7 57
4.2.3.1.3.1 Basic Film Session SOP Class
The Print SCU supports the following DIMSE Service Elements for the Basic Film
Session SOP Class.
N-CREATE - Requests the Print SCP to create an instance of Basic Film Session.
The following Attribute values are supported by the N-CREATE:
Attribute DICOM Tag Valid Range Default Value
Number of Copies ( 2000, 0010 ) 1-99 Set by user
Print Priority ( 2000, 0020 ) HIGH HIGH
Medium Type ( 2000, 0030 ) CLEAR FILM
BLUE FILM
PAPER
Set in Configuration
File
Film Destination ( 2000, 0040 ) MAGAZINE
PROCESSOR
Set in Configuration
File
Session Label ( 2000, 0050 ) “Sdc_DICOM_PRINT” “Sdc_DICOM_PRINT”
Memory
Allocation
( 2000, 0060 ) Sent zero length Sent zero length
If a Failure status is returned during N-CREATE operation of Film session
following action will be taken by Print SCU.
0x213 “Resource Limitation” message will be sent.
All other status “Failure” message will be sent.
In all the cases the print session will be terminated.
4.2.3.1.3.2 Basic Film box SOP Class
The Print SCU supports the following DIMSE Service Elements for the Basic Film Box
SOP Class.
N-CREATE - Requests the Print SCP to create an instance of Film Box.
N-ACTION - Requests the Print SCP to print the Film Box onto Printer.
N-DELETE - Requests the Print SCP to delete the Film Box Instance.
The Following Attribute values for the N-CREATE are supported.
Attribute DICOM Tag Valid Range Default Value
Image Display Format ( 2010,
0010 )
STANDARD/C,R
Printer Dependent
Set in User Interface
Reference Film
Session Sequence
( 2010,
0500 )
Film Orientation ( 2010,
0040 )
PORTRAIT Set in Configuration File
Film Size ID ( 2010,
0050 )
Sent zero length Sent zero length
Magnification type ( 2010,
0060 )
BILINEAR
CUBIC
Set in Configuration File