Service manual

GE Medical Systems SIGNA PROFILE CONFORMANCE STATEMENT
REV 2.7 sm 2303347
doc ver 2.7 53
4 PRINT SCU CONFORMANCE
4.0 Introduction
This Conformance Statement (CS) specifies the SIGNA PROFILE compliance to
DICOM v3.0. It details the DICOM Service Classes and roles which are supported
by this product in it’s version 7.71.
The SIGNA PROFILE product uses DICOM services to provide the DICOM Print
SCU Application Profile. The SIGNA PROFILE product uses DICOM Print SCU to
print images on DICOM Compliant Printers.
Note the format of this section follows the format of the DICOM Standard Part 2
(conformance) Annex A hence the paragraph numbering scheme. Please refer to
that part of the standard while reading this section.
4.1 IMPLEMENTATION MODEL : PRINT SCU
The DICOM Print SCU is a DICOM print filter which provides the capability to print images to
DICOM printers. The DICOM Print filter acts as an SCU of the DICOM print management SOP
class.
4.1.1 Application Data Flow Diagram
DICOM print SCU Implementation model
DICOM INTERFACE
Film DICOM
Composer Print SCU Printer
Film Composer is the User interface and this is used to initiate the local real world activity.
User issues the print request using Film Composer. Film composer allows printer selection
and it composes the preformatted film file. This film file is interpreted by SCU and it sends
the appropriate messages to DICOM print SCP running on DICOM printer.