Service manual

GE Medical Systems SIGNA PROFILE CONFORMANCE STATEMENT
REV 2.7 sm 2303347
doc ver 2.7 25
When the Real-World activity “Get” is initiated all presentation contexts shown in
table 2.2.1.2.1.2-1 are proposed during association establishment, but only the
Query/Retrieve-MOVE related contexts are applicable to this activity.
2.2.1.2.3.2.1 SOP Specific Conformance Statement for C-MOVE SCU
When the operator starts a Get operation at any level (Study, Series, Image) the
DICOM Server AE will initiate a C-MOVE-RQ request to the Remote AE with the
DICOM Server AE as the Destination AE. The Storage SCP will handle the
incoming images as described in section 2.2.1.3.1.
Each C-MOVE SCU operation supports an “Association Timer”, “Operation
Inactivity Timer” and “Session Timer” with time out values of 900 seconds, 900
seconds and 60 minutes respectively. These time-outs are configurable in dcs.cfg
as bi_assoc_tio, bi_move_tio and bi_session_tio respectively.
The DICOM Server AE will send a C-CANCEL-MOVE-RQ to the Remote AE if the
operator “Pauses” or “Clears” the job from the local database manager Network
queue.
2.2.1.2.4 DICOM Ping to Remote AE
2.2.1.2.4.1 Associated Real-World Activity
The operator must first select a destination by choosing “Selected remote host:”
from “Network” pull-down menu on the local database manager and then choose a
hostname. The operator then has to perform the Real-World activity “Choose
DICOM PING” to send a C-ECHO request to get the status of the Remote AE.
If the C-ECHO response is received with a success, the DICOM Server will post a pop-up
to the operator indicating that the
remote device is alive.
2.2.1.2.4.2 Presentation Context Table
Table 2.2.1.3.2.2-1: Acceptable Presentation Contexts for DICOM Server AE
and Real-World Activity DICOM Ping
Presentation Context Table
Abstract Syntax Transfer Syntax Role Extended
Negotiation
Name UID Name List UID List
Verification 1.2.840.10008.1.1 Implicit VR Little
Endian
1.2.840.10008.1.2 SCP None