User Manual

13
Technical Data
Scouring Machine EPF 1503
Rated voltage: 230 V ~ 110 V ~
Power input: 1500 W 1500 W
Rated current: 6.8 A 13.5 A
Order number: 0651I 0651J
Frequency: 50 - 60 Hz
Rated speed: 4000 rpm
Max. milling head diameter: 140 mm
Collet: M14, male thread
Protection class: II
Degree of protection: IP 20
Net weight: approx. 3,9 kg
Interference suppression: EN 55014 and EN 61000
Supply
Scouring Machine with milling head, Allen key and operating instructions in
a metal case
Application for Indented Purpose
The Scouring Machine EPF 1503 is indented for professional use.
With its milling head, the tool is intended to be used to remove loose
plaster, glue and old paints (e.g. graffiti) in combination with an industrial
vacuum cleaner.
It is not allowed to work on concrete surfaces.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.