User's Manual

CIP-4500 User Manual 73
8 Appendix
Use NAT function
①󰼿 Connecting IP Videophone in the Private Network
This describes procedures of setting an IP videophone and external sharers if installation of
IP videophone is required in a private network configured with an external sharer.
A. Check internal/external IP address
First, check an IP videophone’s IP address and external sharer IP address (WAN, Global
or Public) before setting an IP videophone and external sharer.
View Internet Status menu enables you to check IP videophone’s IP address. If
connected to the private network, IP address is usually set to the following values:
 192.168.xxx.xxx ~ 192.168.255.255
 10.xxx.xxx.xxx ~ 10.255.255.255
 172.16.xxx.xxx ~ 172.31.xxx.xxx
You can check an external sharer IP address through Sharer Status of each sharer. For
further information, refer to user’s manual on each sharer.
The figure below shows screen on which you can check set in external sharer IP address
at your computer.