User's Manual

CIP-4500 User Manual 55
 In order to enter server information, select Server
Configuration with ST in Internet Phone, and
press XW or ‘ENT’. (Or just press .)
 Use XW to select the type of server to be used in
SIP. (Proxy/Registrar) Press T or ‘ENT’ to move to
‘Address’.
 In ‘Address’, enter IP address or domain name of the Internet phone service. Press T or
‘ENT’ to move to ‘Port’.
 In ‘Port’, enter the port number of the Internet phone server.
 Press ‘EXIT’ to exit the menu or go back to the
upper menu. If the IP setting is changed, the
following message box is displayed. If the IP setting
is changed, click ‘YES’ and press ‘ENT’.
NOTE. All the items must have the values given by the service provider when the phone is registered
to the Internet phone service. If any of the item is not received from the service provider, it must be left
blank.
NOTE. If the IP Videophone is successfully registered to the Internet phone service, the REGISTER
lamp is on.
⑤󰼿 Internet Sharing Configuration
 Use ST to select Internet Sharing in the IP
menu and press XW or ‘ENT’. (Or just press
.)