User's Manual

CIP-4500 User Manual 54
User Information
 Use ST to select Internet Phone in the IP menu
and press XW or ‘ENT’. (Or just press .)
 In order to enter user information, select User
Information with ST in Internet Phone, and press
XW or ‘ENT’. (Or just press .)
 In ‘User Name’, enter user ID. Press T or ‘ENT’ to
move to Password.
 In ‘Password’, set the password used for
authentication for access to Internet phone server.
The password is displayed as ‘*’. Press T or ‘ENT’
to move to Password ‘Address’.
 In ‘Address’, enter domain name or IP address of SIP used for access to Internet phone
service. Press T or ‘ENT’ to move to ‘Auth. ID’.
 In ‘Auth. ID’, enter authentication id used for access to Internet phone service. Press T or
‘ENT’ to move to ‘Realm’.
 In ‘Realm’, show the realm information given by Internet phone server.
 Press ‘EXIT’ to exit the menu or go back to the upper menu. If the IP setting is changed,
the following message box is displayed.
NOTE. You must enter ‘User Name’ and ‘Address’ for SIP call.
NOTE. All the items must have the values given by the service provider when the phone is
registered to the Internet phone service. If any of the item is not received from the service
provider, it must be left blank.
Server Configuration
 Use ST to select Internet Phone in the IP menu and press XW or ‘ENT’. (Or just press
.)