User's Manual

CIP-4500 User Manual 52
 Press ‘EXIT’ to exit the menu or go back to the
upper menu. If the IP setting is changed, the
message in the right is displayed. If you want to
change IP configuration, click ‘YES’ and press ‘ENT’.
NOTE. If the access type is changed, reboot the system to apply new IP information.
NOTE. Most of the sites to be visited on Internet are expressed in the domain names. In order to
access to those sites successfully, the domain name should be resolved by the DNS server. For this,
you have to input IP address of the DNS server in this menu. If you are connected to the ADSL, Cable
Network or LAN with dynamic IP, the DNS address will be given by the server.
②󰼿 Advanced Internet Configuration
 Use ST to select Advanced in the IP menu and
press XW or ‘ENT’. (Or just press
.)
 In ‘DNS Addr’, enter IP address of the DNS server to
be used in emergency.
 Press ‘EXIT’ to exit the menu or go back to the upper
menu. If the IP setting is changed, the message in the
right is displayed. If you want to change IP
configuration, click ‘YES’ and press ‘ENT’.
NOTE The secondary DNS is used when the main DNS
server is in defect.
③󰼿 Internet Phone Configuration (H.323)
 Use ST to select Internet Phone in the IP menu and press XW or ‘ENT’. (Or just press
.)
 In ‘G.K Addr1’ enter the server address of the Internet phone service provider’s network.
To move to ‘H.323 ID’, press T or ‘ENT’.