User's Manual

CIP-4500 User Manual 48
⑤󰼿 Time/Date Setting
The IP Videophone receives the current time from the
Internet time server. In this menu, you can set the
options to be applied to the time of the Internet time
server.
 Use ST to select Miscellaneous in the UserSet
menu and press XW or ‘ENT’. (Or just press
.)
 Press ST to select Time/Date in the
Miscellaneous and press XW or ‘ENT’. (Or just press
.)
 In ‘D.S.T’, use XW to select whether to apply the
summer time. Use T or ‘ENT’ to move to ‘G.M.T’.
 In ‘G.M.T’, use XW to select the standard time of the zone where the IP Videophone is
installed.
 In ‘Server1’, enter the address of the network time server. The IP Videophone has the
default network time server information. You can designate the time server to which the IP
Videophone will access. Use T or ‘ENT’ to move to ‘Server2’ if you want to enter another
time server.
 Press ‘EXIT’ to exit the menu or go back to the upper menu.
NOTE. You can enter IP or domain name of the time server.
NOTE. If ‘Server1’ and ‘Server2’ are left blank, the IP Videophone receives time information from the
default time server.