User's Manual

CIP-4500 User Manual 46
the password. If the two passwords are matched, “Saved” is displayed.
 Press ‘EXIT’ to exit the menu or go back to the upper menu.
NOTE. ‘If ‘On/Off’ set ‘OFF’, the ‘Auto Ans.’ field and
‘Password’ will be deactivated.
NOTE. If Bell of ‘Auto Ans.’ is set to 0, the monitoring
function is activated automatically. ‘Password’ is
meaningful only when the monitoring function is on.
NOTE. If the second password is not matched with the first password, then ‘Incorrect !’ message will be
displayed.
NOTE. If the auto answering function is on, the REGISTER lamp on the phone blinks.
③󰼿 Call setup
Set up the options to be applied to IP video call.
 Use ST to select Call Setup in the UserSet
menu and press XW or ‘ENT’.(Or just press .)
 In ‘Bandwidth’, select the value with XW
(128,192,256,352,512,752 Kbps). This bandwidth is
applied to both voice and video data transmission.
To move to ‘VAD’ use T or ‘ENT’.
 The mute detection function detects the mute
section during the call, and stops transmitting the
voice data to the other party. Use XW to select On
or Off. To move to ‘Video E/D’, use T or ‘ENT’.