User's Manual

CIP-4500 User Manual 45
①󰼿 Bell setting
 Use ST to select Bell in the UserSet menu and
press XW or ‘ENT’.(Or just press
.)
 In ‘Bell’, select one among 4 different kinds of
ringing sounds by using XW. Move down to
‘Volume’ with T or ‘ENT’.
 Select the volume of the ringing sound in ‘Volume’
by using XW. The volume can be one of 5 levels.
 Press ‘EXIT’ to exit the menu or go back to the
upper menu.
NOTE. In case that the volume is set as ‘0’, no
ringing sound is played.
②󰼿 Auto answering mode
 Use ST to select Auto Answering in the
UserSet menu and press XW or ‘ENT’. (Or just
press
.)
 If you want to turn on the auto answering mode,
set ‘ON’ in ‘On/Off’ with XW and move down to
‘Auto Ans.’ with T or ‘ENT’. Otherwise, select ‘OFF’
for ‘On/Off’ field.
 In ‘Auto Ans.’, select the ringing count using XW or
input the number between 0 and 5. Move down to
‘Password’ with T or ‘ENT’.
 ‘Password’ is required to set up the monitoring
function for the auto answering mode. Enter 4 digits
of password. “Enter, again” is displayed to confirm