User Manual

Step 1: Attach Leg (B) to Table Top (A) with 6 - 1½” screws.
Step 2: Repeat for remaining three legs.
Figure 1
Step 3: Attach the Leg Support (C) to table legs with 4- 2½” screws using peck holes
for alignment. Do not tighten.
Step 4: Install 4- 1½” screws as shown and then tighten previously installed
2½”screws
Step 5: Flip table over and insert Leg Support Fill Panel (D)
Figure 2
Required
Qty
Table Top (A)
1
Leg (B)
4
1½” Screws
24
Required
Qty
Leg Support (C)
1
Leg Support Fill
Panel (D)
1
1½” Screws
4
2½” Screws
4
Step 1
Use 1½” Screws
Step 3
Use 2½” Screws
Step 4
Use 2½” Screws
Screw
Leg (C)
Step 5