C36 St. Tropez Counter Chair C.R. Plastic Products Inc. 1 – 533 Romeo Street South Stratford Ontario N5A 4V3 Toll Free: 800-490-1283 Fax: 519-271-8544 www.crpproducts.
A. Seat Qty: 1 C. Right Leg Qty: 1 E. Short Stringer Qty: 1 B. Back Qty: 1 D. Left Leg F. Long Stringer Qty: 1 Qty: 1 G. Foot Rest Qty: 1 PARTS LIST: A - Seat B - Back C - Left Leg D - Right Leg E - Short Stringer F - Long Stringer G - Foot Rest HARDWARE LIST: 9 – 1½” Screws 14 – 2½” Screws Note: Read these instructions carefully before assembling. Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Step 1: Attach Short Stringer (E) to Right Leg (C) using 1 - 1½” screw and 1 - 2½” screw. Detail X Repeat for Left Leg (D). Figure 1 Step 1 Use 1½” Screws Use 2½” Screws Required Right Leg (C) Left Leg (D) Short Stringer (E) 1½” Screws 2½” Screws Qty 1 1 1 2 2 X Keep holes to bottom & countersink to back. Step 2: Attach Leg assembly from step 1 to Seat (A). Use 3 - 1½” screws. Figure 2 Keep leg assembly tight to seat. Step 2 Use 1½” Screws.
Step 3: Attach Back (B) to leg supports with 4 - 2½” screws (detail Y). Step 4: Attach Back (B) to seat with 4 - 2½” screws. Step 5: Attach back Long Stringer (F) with 4 - 1½” screws. Step 6: Attach Foot Rest (G) with 4 - 2½” screws.. Required Back (B) Long Stringer (F) Foot Rest (G) 1½” Screws 2½”Screws Figure 3 Qty 1 1 1 4 12 Step 4 Use 2½” Screws. Y Center support on leg. Step 3 Use 2½” Screws. Foot Rest (G) Long Stringer (F) Step 5 Use 1½” Screws. Step 6 Use 2½” Screws.
