C35 St. Tropez Dining Side Chair C.R. Plastic Products Inc. 1 – 533 Romeo Street South Stratford Ontario N5A 4V3 Toll Free: 800-490-1283 Fax: 519-271-8544 www.crpproducts.
A. Seat C. Right Leg E. Short Stringer Qty. 1 Qty. 1 Qty. 1 B. Back D. Left Leg F. Long Stringer Qty. 1 Qty. 1 Qty. 2 PARTS LIST: A - Seat B - Back C - Left Leg D - Right Leg E - Short Stringer F - Long Stringer HARDWARE LIST: 13 – 1½” Screws 10 – 2½” Screws Note: Read these instructions carefully before assembling. Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Step 1: Attach Short Stringer (E) to Right Leg (C) using 1 - 1½” screw and 1 - 2½” screw. Detail X Repeat for Left Leg (D). Use 2½” Screws Qty 1 1 Short Stringer(E) 4 2 2 1½” Screws 2½” Screws Figure 1 Step 1 Use 1½” Screws Required Right Leg(C) Left Leg (D) X Keep holes to bottom & countersink to back. Step 2: Attach Leg assembly from step 1 to Seat (A). Use 3 - 1½” screws. Figure 2 Keep leg assembly tight to seat. Step 2 Use 1½” Screws.
Step 3: Attach Back (B) to leg supports with 4 - 2½” screws (detail Y). Step 4: Attach Back (B) to seat with 4 - 2½” screws. Step 5: Attach back Long Stringer (F) with 4 - 1½” screws. Step 6: Attach front Long Stringer (F) with 4 - 1½” screws..
