Owner's manual

Step 1: Attach seat (A) to Back (B) on one side using 2 - 2½” screws.

Step 2: Flip chair over and insert 2 more 2½” screws on other side.

Figure 1

Step 3: Attach Left Leg (C) to back leg using 1 - 1½” screw

Step 4: Attach front of leg (C) to seat using 1 - 1½” screw.

Step 5: Install the remaining 3 - 1½” screws.

Step 6: Flip chair over and repeat for Right Leg (D).

Figure 2

Required

Qty

Seat (A)

Back (B)

2½” Screws

Required

Qty

Left Leg (C)

Right Leg (D)

1½” Screws

Step 1

Use 2½” Screws

Step 3

Place curved leg in center of back

leg, flush bottom and install this

screw first.

Use Stringer (E) to

keep chair level.

Step 2

Use 2½” Screws

Use Stringer (E) to

keep chair level.

Step 4

Use scribe line on leg for alignment and

install this screw second.