C34 St. Tropez Dining Arm Chair C.R. Plastic Products Inc. 1 – 533 Romeo Street South Stratford Ontario N5A 4V3 Toll Free: 800-490-1283 Fax: 519-271-8544 www.crpproducts.
A. Seat Qty: 1 B. Back Qty: 1 C. Left Leg Qty: 1 D. Right Leg Qty: 1 E. Stringer Qty: 2 PARTS LIST: A - Seat B - Back C - Left Leg D - Right Leg E - Stringer HARDWARE LIST: 18 – 1½” Screws 4 – 2½” Screws Note: Read these instructions carefully before assembling. Tools required: # 2 Phillips or #2 Robertson bit and power drill. Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces. Two people might be required for assembly.
Step 1: Attach seat (A) to Back (B) on one side using 2 - 2½” screws. Step 2: Flip chair over and insert 2 more 2½” screws on other side. Required Seat (A) Back (B) 2½” Screws Figure 1 Step 1 Use 2½” Screws Step 3: Attach Left Leg (C) to back leg using 1 - 1½” screw Step 4: Attach front of leg (C) to seat using 1 - 1½” screw. Step 5: Install the remaining 3 - 1½” screws. Step 6: Flip chair over and repeat for Right Leg (D).
Step 7: Insert one of the Stringers (E) and install with 2 - 1½” screws. Step 8: Repeat for second stringer (E). Step 9: Flip the chair over and install 4 - 1½ screws.