User's Manual

To Setting Dial-Up connection, click ‘Option’ button and click ‘Data’ button.
A
lso to change connecting type, click the radio Button.
NOTE : You can use Packet, QNC type in 1X current coverage. And can’t use Packet type in IS 95
coverage.
Connecting is also possible to connect (Dial-up) by clicking the connect button on the main window without
opening
the Dial-up setting window. When clicking the connect button, the last Service option will be used for dial up.
If the user changes the username or password and clicks Connect, the Application Software will store the new
username and password.
To load the The default username and password select the ‘Restore’ button, and the ‘Apply’ button must be
clicked.
Dial-up Networking - Packet
A
lways On is a CDMA 1x internet domain that applies to data (in Kilobytes) based charging packages.
This service allows you to remain connected to the internet all the time.
charges will apply to the amount of data sent and received with this domain.
Dial-up Networking - QNC Standard.
When you are not within CDMA 1x coverage or you have not subscribed to CDMA 1x, you can still connect to
operator's Standard Mobile internet Service using Quick Net Connect, provided you are withis CDMA
coverage.
Quick Net Connect (QNC) does not require a separate subscription
About
It displays Software/ Firmware Version, PRL ID as shown below.
페이지 17 / 22제목 없음
2005-06-13file://C:₩Documents%20and%20Settings₩Owner₩Local%20Settings...