Instruction Sheet

RAILWAY

Instruction Manual

Railway Models: RW, CRW, ARW

Tactical Railway Models: TRW, CTRW, ATRW

C-MORE Systems

Voice - 703-361-2663

Fax - 703-361-5881

e-mail - sales@cmore.com

web - www.cmore.com

CMS-IS-RW-041608

Congratulations! You are now the owner of the most advanced reflex sighting system available. You have displayed excellent judge-

ment in your purchase, and you will be rewarded with unparalleled performance. Use it with pride, but please familiarize yourself with

the system first.

PLEASE read instructions before operating or installing this sighting system.

PACKAGE CONTENTS

Models - RW, CRW, TRW, CTRW (Polymer Bodies)

Qty 1 - Instruction Manual

Qty 1 - Railway Red Dot Sight

Qty 1 - Hardware Pack = (1) Hex Wrench 1/16, (1) Hex Wrench 5/64, (1) Torx Wrench T20,

(2) Extra Cover Screws

Models - ARW, ATRW (Aluminum Bodies)

Qty 1 - Instruction Manual

Qty 1 - Railway Red Dot Sight

Qty 1 - Hardware Pack = (1) Hex Wrench 1/16, (1) Torx Wrench T20, (2) Extra Cover Screws

Page 1 of 3

(Tactical Railway)

1.Beam Splitter Lens

2.Elevation Adjustment Screw

3.Battery Cover

4.Diode Cover

5.Diode Module

6.Intensity Switch

7.Clamp Screw

8.Railway Base

9.Windage Guide Pin

10.Elevation Locking Screw

11.Windage Adjustment Screw

12.Windage Locking Screw

13.Tactical Spacer Plate (Tactical Railway Only)

PAGE 1
RAILWAY Instruction Manual Railway Models: RW, CRW, ARW Tactical Railway Models: TRW, CTRW, ATRW C-MORE Systems Voice Fax e-mail web - 703-361-2663 703-361-5881 sales@cmore.com www.cmore.com CMS-IS-RW-041608 © C-MORE Systems 1993-2008 Congratulations! You are now the owner of the most advanced reflex sighting system available. You have displayed excellent judgement in your purchase, and you will be rewarded with unparalleled performance.
PAGE 2
INTENSITY SWITCHES C-MORE sighting systems are available with two switch styles, standard and click adjustable. The standard is a dial rheostat switch with a continuous adjustment through the wide intensity range. The click adjustable switch has 12 positions. The first position is off and the second and third are for night vision (low / high) and are not visible. Positions 4 - 12 are the visible intensity settings giving you a wide range of adjustment for any lighting condition.
PAGE 3
MAINTENANCE The sight does not require any special maintenance other than keeping it clean and making sure everything is tight. Doing the following after each shooting session, will ensure the sight a long life. 1) Clean the sight. Use a soft clean cloth to wipe down the sight body (Not the Lens) and remove powder residue. 2) Clean the lens. The hard coated glass lens is very durable, but periodic cleaning is necessary.