Instruction Manual

SERENDIPITY
Serendipity Models: SL, CSL
C-MORE Systems
Voice - 703-361-2663
Fax - 703-361-5881
e-mail - [e-mail]
web - www.cmore.com
CMS-IB-SL-041608
Congratulations! You are now the owner of the most advanced reflex sighting system available. You have displayed
excellent judgement in your purchase, and you will be rewarded with unparalleled performance. Use it with pride, but
please familiarize yourself with the system first.
PLEASE read instructions before operating or installing this sighting system.
1.Beam Splitter Lens
2.Elevation Adjustment Screw
3.Battery Cover
4.Diode Cover
5.Diode Module
6.Intensity Switch
7.Windage Guide Pin
8.Elevation Locking Screw
9.Windage Adjustment Screw
10.Windage Locking Screw
11.Mounting Screw Holes
12.Mounting Pads
13.Mounting Legs
INSTALLATION
The Serendipity was originally designed to attach to 1911 style handguns for competition shooting by drilling and
tapping the frame and mounting the sight directly via the integral mount.
The mounting legs allow for a maximum slide width of .950” (A).
The mounting legs allow for a maximum slide height of 1” (B).
The mounting pads can be machined to accomodate frame widths
between .750” and 1” (C).
INTENSITY SWITCHES
C-MORE sighting systems are available with two switch styles, standard and click adjustable. The standard is a
dial rheostat switch with a continuous adjustment through the wide intensity range. The click adjustable switch
has 12 positions. The first position is off and the second and third are for night vision (low / high) and are not vis-
ible. Positions 4 - 12 are the visible intensity settings giving you a wide range of adjustment for any lighting con-
dition.
INTENSITY ADJUSTMENT
The intensity of the dot needs to be adjusted to the lighting condition in the operating area. The dot should
appear bright but not glaring. For example, outside in bright sunlight you will most likely use the brightest set-
ting, while at dawn or dusk, or indoors you will need to use one of the lower settings. The first two positions on
the click switch are extremely dim and can only be seen through a Night Vision device.
PACKAGE CONTENTS
Models - SL, CSL (Polymer Bodies)
Qty 1 - Instruction Manual
Qty 1 - Serendipity Mounting Instructions
Qty 1 - Serendipity Red Dot Sight
Qty 1 - Hardware Pack = (1) Hex Wrench 1/16, (1) Hex Wrench 5/64, (2) Extra Cover Screws,
Qty 1 - Mounting Screw Pack = (8) Mounting Screws 5-40 x .330” (6 required, 2 extra)
1
2
3
4
5
6
7
8
9
10
Instruction Manual
© C-MORE Systems 1993-2008
Proceed to the Serendipity Mounting Instructions sheet included
with this Instruction Manual to continue the installation process.
11
13
12
B
A
C