User manual

TxD
RxD
PWR
LED Status Indicators
Replacement Parts
USB to RS232 Programming Cable Assembly
TOP VIEW
FRONT VIEW
LEFT VIEW
0.484
[12.3]
2.598
[66.0]
2.539
[64.5]
1.417
[36.0]
0.886
[22.5]
0.923
[23.4]
Units: inches [mm]
Clear Screen Overlay
Converter
Dimensions
USB to RS232 Converter Specifications
Part Number:
EEAA--MMGG--PPGGMM--CCBBLL
Description:
6-ft. cable assembly to connect personal computer to any
CC--mmoorree
Micro-Graphic panel for setup and
programming. (Note: This cable assembly uses the PC's USB port and converts the signals to serial
transmissions. The USB port supplies 5 VDC to the Micro-Graphic panel for configuration operations.) Assembly
includes standard USB A-type connector to B-type connector cable, custom converter, and an RS232C cable
(DV-1000CBL) with RJ12 modular connector on each end.
Hardware:
• USB Interface
USB Specification Rev. 1.1
Connector: USB Type B jack to accept USB Type B cable plug
• Serial Interface
RS232 (EIA-232-E)
Connector: RJ12 phone jack 6p to accept RJ12 cable plug
• Baud Rate
115.2 kbps Maximum
• Input Voltage
5 VDC (Supplied thru serial interface cable.)
• Power Consumption
50 mA (Does not include power to panel and/or bezel.)
Accessory Cables:
• USB Cable
USB Type A plug to PC on one end, USB Type B plug to converter on other end, 0.30 m [1 foot] length (* Note)
• Serial Cable
DV-1000CBL cable with RJ12 phone plug connectors on both ends, 2.0 m [6.56 feet] length (* Note)
Physical:
• Dimensions
2.559” (W) x 1.417” (H) x 0.886” (D)
[65.0 mm x 36.0 mm x 22.5 mm]
• Weight
1.06 oz. [30 g]
Environmental: Same as C-more Micro-Graphic panel specifications.
* Note: Maximum cable length for either the USB or serial cable should not exceed 2.0 m [6.56 feet] in length.
C
-more Micro-Graphic Panel Dimensions
Converter Status Indicators
EA-MG6-BZ2
Cutout Dimensions
20 Button Landscape (Horizontal) Keypad Bezel
Panel Thickness
EA-MG6-BZ2 Keypad
Bezel Dimensions
6
.295
[
159.9]
6.850
[
174.0]
.236
[6.0]
1
.453
[36.9]
1
.689
[42.9]
2
.13
[54.1]
GASKET
M
OUNTING CLIP
(4) places
Units: Inches [mm]
4.770
[121.3]
5
.331
[135.4]
EA1-S6ML & EA1-S6MLW
Panel Dimensions
NOTE: Panel shown in
Landscape (Horizontal)
orientation
E
NCLOSURE MOUNTING
THICKNESS RANGE
0
.04” - 0.2” [1 - 5mm]
R
R
LISTEDLISTED
7
M177M17
D
ate code:****Date code:****
5
5443322
1
1
R
01.R01.
M
ADE IN CHINAMADE IN CHINA
E
A1-S6MLW?{0752015001EA1-S6MLW?{0752015001
MODEL:EA1-S6MLWMODEL:EA1-S6MLW
I
NPUT:12-24V 6.5WINPUT:12-24V 6.5W
I
ND.CONT.EQ.IND.CONT.EQ.
MOUNTING CLIP
SCREW TORQUE RANGE
2
1 - 28 oz-in [0.15-0.2 Nm]
Enclosure Mounting Thickness
Mounting Clip Screw Torque
Part Number Description
EA-MG-BZ2-BRK
Replacement mounting clip for
CC--mmoorree
Micro-Graphic panel and keypad bezels (pk of 8)
EA-MG-DC-CON
Replacement DC power connector (pk of 5)
EA-MG6-S6ML-GSK
Replacement mounting gasket for
CC--mmoorree
6” Micro-Graphic panels
EA-MG6-BZ2-GSK
Replacement mounting gasket for
CC--mmoorree
6” Micro-Graphic keypad bezels EA-MG6-BZ2 and EA-MG6-BZ2P
EA-MG-S6ML-FKL
Replacement function key label insert for
CC--mmoorree
Micro-Graphic panels
(pk of 5; 3 blank, 1 F1-F5 for landscape, 1 F1-F5 for portrait)
Panel Mounting Clips
Part No. EA-MG-BZ2-BRK
DC Power Connector
Part No. EA-MG-DC-CON
Panel Gasket
Part No. EA-MG6-S6ML-GSK
(pk of 5)
(pk of 8)
Function Keys Label Inserts
Part No. EA-MG6-S6ML-FKL
(pk of 5; 3 blank, 1 F1-F5 for
landscape, 1 F1-F5 for portrait)
Keypad Bezel Gasket
Part No. EA-MG6-BZ2-GSK
77
8
8
99
4
4
5
5 66
1
1
2
2 33
+/-+/-
0
0
M
enuMenu
C
LRCLR
EnterEnter
EscEsc
5.588
[141.9]
6
.394
[162.4]
0
.394
[10.0]
2.094
[
53.2]
1.882
[47.8]
9.195
[
233.5]
10.000
[254.0]
GASKET
MOUNTING CLIP (Qty:8)
SCREW TORQUE RANGE
2
1 - 28 oz-in [0.15 - 0.2 Nm]
Units: Inches [mm]
MOUNTING CLIP
(
8) places
E
nterEnter
77
8
8
9
9
4
4
5
5 66
1
1
2
2 33
+
/-+/-
0
0
MenuMenu
CLRCLR
EscEsc
Units: Inches [mm]
0.382
[
9.7]
0.382
[
9.7]
0
.382
[9.7]
0.382
[9.7]
1
43.0
+1
–
0
+
0.04
–
0.00
5.630
CUTOUT
2
34.6
+
1
–
0
+0.04
–
0.00
9
.236
R0.59 [R1.5]
CUTOUT
OUTLINE
BEZEL
OUTLINE
E
NCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
EA-MG6-BZ2
Keypad Bezel
Four directional
cursor buttons,
numeric buttons and
ESC, MENU, CLEAR
and ENTER buttons.
20-Button Keypad Bezel Specifications
Part Number:
EEAA--MMGG66--BBZZ22
General:
• Micro-Graphic
Panels Supported
E
A-S6ML, EA-S6MLW
• Connection
Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
• Power Consumption
N
one
• Keypad Button Life
M
inimum of 500,000 cycles
• Enclosure Mounting
(8) mounting clips, EA-MG-BZ2-BRK, included.
N
ote: The
C
C
-
-
m
m
o
o
r
r
e
e
6
” Micro-Graphic panel is installed into the keypad bezel using the
(4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
Environmental:
• Operating Temperature
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating 50 °C
• Storage Temperature
-20 to 60 °C (-4 to 140 °F)
• Humidity
5 to 95 % RH (non-condensing)
• Environmental air
F
or use in Pollution Degree 2 environment
• Vibration
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1
octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
I
mpulse 1000 V @ 1 µs pulse
• Enclosure
For use on a flat surface of Type 1, 4X enclosure (for indoor use only)
• Agency Approvals
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382
Physical:
• Dimensions
10.000” (W) x 6.394” (H) x 2.488” (D)
[254.0 mm x 162.4 mm x 63.2 mm]
• Weight
26.1 oz. [740 g]
EA-MG6-BZ2P
Cutout Dimensions
21 Button Landscape (Horizontal) Keypad Bezel
Panel Thickness
E
NCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
EA-MG6-BZ2P
Keypad Bezel
EnterEnter
5.588
[141.9]
6.394
[162.4]
0
.394
[10.0]
2.094
[53.2]
1.882
[47.8]
9.195
[233.5]
1
0.000
[254.0]
G
ASKET
MOUNTING CLIP (Qty: 8)
S
CREW TORQUE RANGE
21 - 28 oz-in [0.15 - 0.2 Nm]
U
nits: Inches [mm]
MOUNTING CLIP
(8) places
CLRCLR
M
enuMenu
E
scEsc
9
98877
6
65544
3
322
1
1
+
/-+/-
0
0
E
nterEnter
BEZEL
O
UTLINE
0.382
[9.7]
0.382
[9.7]
0
.382
[9.7]
0.382
[
9.7]
143.0
+
1
–
0
+
0.04
–
0.00
5.630
CUTOUT
234.6
+
1
–
0
+
0.04
–0.00
9
.236
R
0.59 [R1.5]
C
UTOUT
OUTLINE
EnterEnter
C
LRCLR
MenuMenu
E
scEsc
9
98877
665544
3322
11
+
/-+/-
0
0
EnterEnter
Four directional cur-
sor buttons, numeric
buttons, and ESC,
MENU, CLEAR and
two ENTER buttons.
EA-MG6-BZ2 Keypad
Bezel Dimensions
21-Button Keypad Bezel Specifications
Part Number:
E
E
A
A
-
-
M
M
G
G
6
6
-
-
B
B
Z
Z
2
2
P
P
General:
• Micro-Graphic
Panels Supported
EA-S6ML, EA-S6MLW
• Connection
Connects with expansion connector on the rear of the C-more 6” Micro-Graphic panel.
• Power Consumption
None
• Keypad Button Life
Minimum of 500,000 cycles
• Enclosure Mounting
(8) mounting clips, EA-MG-BZ2-BRK, included.
Note: The
CC--mmoorree
6” Micro-Graphic panel is installed into the keypad bezel using the
(
4) mounting clips, EA-MG-BZ2-BRK, that are supplied with the panel.
Environmental:
• Operating Temperature
0
to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating 50 °C
• Storage Temperature
-20 to 60 °C (-4 to 140 °F)
• Humidity
5 to 95 % RH (non-condensing)
• Environmental air
For use in Pollution Degree 2 environment
• Vibration
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1
octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock
I
EC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
I
mpulse 1000 V @ 1 µs pulse
• Enclosure
For use on a flat surface of Type 1, 4X enclosure (for indoor use only)
• Agency Approvals
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382
Physical:
• Dimensions
6.394” (W) x 10.000” (H) x 2.488” (D)
[162.4 mm x 254.0 mm x 63.2 mm]
• Weight
26.1 oz. [740 g]
EA-6-COV2
4.913
[124.8]
3.795
[96.4]
0.197
[5.0]
0.157
[4.0]
EA-6-COV2
Dimensions
Remove the overlay from the package
Remove the paper backing from the overlay
Align the overlay with the screen and
press the adhesive firmly into place
Remove the protective film*
*NOTE: The protective
cover ships with a thin
protective sheet on the
face of the cover that
needs to be carefully
removed. If your panel
is not clear, the protec-
tive sheet may not have
been removed.
Step 1
Step 3
Step 2
Step 4
Communication Port Adapters
The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of
the 6” panel to allow a PLC communication cable to be plugged in at a 90
degree angle to reduce panel depth requirements. 15-pin straight through
pin-out. UL Recognized.
EA-ADPTR-4
C
ountry of Origin
D
ate code
I
OIOI – PLC
1.605
[40.8]
1.873
[47.6]
0.793
[20.2]
E
A-ADPTR-4
K
OYO ELECTRONICS INDUSTRIES CO., LTD.
Units: inches [mm]
C
ountry of Origin
E
A-COMCON-3
GND
SD–
SD+
RD–
RD+
TERM
D
ate code
1.756
[44.6]
1.873
[47.6]
1.126
[28.6]
KOYO ELECTRONICS INDUSTRIES CO., LTD.
Units: inches [mm]
1.695
[43.1]
0.412
[10.5]
0.751
[19.1]
0.333
[8.5]
Units: inches [mm]
1
.695
[43.1]
0.564
[14.3]
0.903
[22.9]
0.687
[17.5]
Units: inches [mm]
Dimensions
R
R
Terminals
GND SD–
SD+
RD– RD+ TERM
D-SUB 15-pin 90-degree Communication Port Adapter (EA-ADPTR-4)
The EA-COMCON-3 adapter plugs into the 15-pin serial port on the rear of
the 6”panel to allow wire terminal connections for an RS-422/RS-485/DH-485
PLC communication cable. UL Recognized.
D-SUB 15-pin to Terminal Block Adapter (EA-COMCON-3)
EA-COMCON-3
Dimensions
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
NOTE: Mounting clips for the
panel or keypad bezel are
included with each product
C-more 6” Micro-Graphic Panel Specifications
Specifications
Description:
3
20 x 240 dots LCD display (Landscape Mode),
f
ive user defined keypad function buttons, and five user defined LED's
Display:
• Type
5.7" STN monochrome LCD, graphical characters
• Resolution
3
20 (W) x 240 (H) dots (Landscape Mode)
2
40 (W) x 320 (H) dots (Portrait Mode)
• Color
2
colors (normal / inverse)
• Display Brightness
(Reference)
Low Power Mode* High Power Mode
R
ed –> 10 nits
G
reen –> 11 nits
W
hite –> 13 nits
R
ed –> 50 nits
G
reen –> 125 nits
W
hite –> 150 nits
• Viewing Area Size
4.614” (W) x 3.480” (H) [117.2 mm x 88.4 mm]
• Active Area Size
4
.535” (W) x 3.400” (H) [115.2 mm x 86.4 mm]
• Contrast
Adjusted from the panel’s built-in configuration setup menu
• Viewing Angle
3
, 9 o’clock axis –> 45 degrees
6 o’clock axis –> 40 degrees
1
2 o’clock axis –> 20 degrees
Backlight:
• Type
LED
• Color
Model EA1-S6ML : 5 user defined colors:
Red, Green, Amber, Lime, and Yellow
M
odel EA1-S6MLW : 5 user defined colors:
W
hite, Pink1, Pink2, Pink3, and Red
• User Replaceable
No
Touch Screen:
•Type
A
nalog touch panel
• Operation
8
2 gram force [0.8 N] maximum
• Life
M
inimum of 1,000,000 cycles
Features:
• User Memory
1792 kBytes
• Number of Screens
Up to 999 – limited by project memory usage
• Beep (Internal)
Yes
• Keypad Function Buttons
Five user defined function key buttons with the ability to custom label with an overlay.
M
inimum of 500,000 cycles
• Keypad Function Button LEDs
E
ach function key button includes a red LED that can be user programmed.
• Serial Communications
B
uilt-in RJ12 serial communications port (RS-232)
a
nd 15-pin D-sub serial communications port (RS-232, RS-485 / 422).
• Expansion Connection
Yes – used with optional Keypad Bezels, EA-MG6-BZ2 & EA-MG6-BZ2P
Screen Objects:
• Functional Devices
P
ush Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric
Entry, Inc/Dec Value, Bar Graph, Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text,
Lookup Text, Dynamic Text, Screen Change Push Button, Screen Selector, Adjust Contrast, Function, Key
C
onfiguration Object, Real Time Graphics Line Graph, Analog Meter.
• Static Shapes
Lines, Rectangles, Circles and Frames
• Displayable Fonts
Fixed fonts: 6x6, 6x8, 8x16, 16x16, 32x16, 32x32, and Windows fonts
Electrical:
Low Power Mode* High Power Mode
• Input Voltage Range
5.0 VDC (4.75 – 5.25 VDC) 12/24 VDC (10.2 – 26.4 VDC)
• Input Power
S
upplied through the panel’s RJ12 serial communi-
cations port connection when used with most
AutomationDirect PLCs having a RJ12 communica-
tion port or from a PC USB.
Supplied from an external 12-24 VDC power source
• Power Consumption
1
.05 W @ 5 VDC (210 mA)
6
.5 W @ 10.2 VDC (630 mA)
• Recommended Fuse
No fuse required when directly connected to a PLC
or PC with recommended cable.
Type AGC fast acting glass fuse,
750 mA, 250 VAC, ADC p/n AGC-75
• Maximum Inrush Current
1 A for 500 µs 10 A for 500 µs
• Acceptable External
Power Drop Duration
M
aximum 1 ms
Environmental:
• Operating Temperature
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating 50 °C
• Storage Temperature
–
20 to +60 °C (–4 to +140 °F)
• Humidity
5–95% RH (non-condensing)
• Environmental Air
For use in Pollution Degree 2 environment
• Vibration
I
EC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
• Shock
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction per axis,
on 3 mutually perpendicular axes (total of 18 shocks)
• Noise Immunity
NEMA ICS3-304
R
FI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Enclosure
For use on a flat surface of Type 1, 4X enclosure (for
iinnddoooorr
use only)
• Agency Approvals
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382, CSA File 234884
Physical:
• Dimensions
6.850” (W) x 5.331” (H) x 2.130” (D) [174.0 mm x 135.4 mm x 54.1 mm] (Landscape Mode)
5.331” (W) x 6.850” (H) x 2.130” (D) [135.4 mm x 174.0 mm x 54.1 mm] (Portrait Mode)
• Enclosure Mounting
Thickness Range
0.04” – 0.2” [1 – 5 mm]
• Mounting Clip Screw
Torque Range
21 – 28 oz-in [0.15 – 0.2 Nm]
• Depth from bezel rear
with options Module
1.894” [47.1 mm]
• Weight
30.69 oz. (870 g)
*NOTE: When the 6” panel is powered through Port1 from a connected PLC or PC, the screen bright-
ness is diminished because the panel is running in Low-Power Mode. For full brightness, connect
an external 12-24 VDC power source to the 6” panel’s power connection. Low-Power Mode should
be used during initial programming only. Connect an external 12-24 VDC power source when the
panel is installed in its application.
Customizing the Function Keys Label Insert
Step 1 - Remove existing
function key label insert
using a small tool such as
jeweler’s screw driver.
Step 2 - Remove the
protective film from the
blank key label insert.
Step 3 - If desired, print and
apply self adhesive labels to
the blank insert.
Step 4 - Install the new insert
into the slot in the side of the
panel and lock tab into place.
4.803
[122.0]
0.563
[14.3]
Units: inches [mm]
0.282
[7.15]
0.709
[18.0]
Typical
Data Sheet: EA1-MG6-QSG, Rev. J