Specifications

1 - 8 0 0 - 6 3 3 - 0 4 0 5
e11-60
Operator Interface
Volume 14
C-more 4” & 6” Micro-Graphic PLC Connections
Cabling requirements
When using the built in RJ12 serial port (Port1) on models
EA1-S6ML or EA1-S6MLW to connect with the CLICK,
ProductivitySeries, DL05, DL06, DL105, DL205, D3-350
and DL405 CPUs, your cabling choices are fairly simple.
• DV-1000CBL — connects to CLICK, P3-550, DL05, DL06, DL105,
DL205, D3-350 and D4-450 phone jack.
• D4-1000CBL — connects to all DL405 CPU 15-pin ports.
A maximum cable length of
1100 ffeeeett
between the EA1-S6ML
or EA1-S6MLW and the PLC is recommended when
powering the panel in Low-Power Mode from the PLC. The
EA1-T4CL and EA1-T6CL cannot be powered from a PLC.
The
CC--mmoorree
4” and 6” Micro-Graphic panels can commu-
nicate through its built-in 15-pin serial port (Port2) via RS-
232, RS-422 and RS-485 using these cables.
• EA-2CBL — connects to CLICK, P3-550, DL05, DL105, DL205,
D3-350 and D4-450 phone jack.
• EA-2CBL-1 — connects to D2-250, D250-1, D2-260, DL06 VGA
connector.
The EA1-T4CL and EA1-T6CL can only communicate to a
controller through the 15-pin serial Port2; the USB Port1 on
these TFT models is for programming only.
Drivers for your Controller
• AutomationDirect Productivity Series
• AutomationDirect Do-more
• AutomationDirect CLICK (Modbus)
• DirectLOGIC K-sequence, DirectLOGIC DirectNET, DirectLOGIC
Modbus (Koyo Addressing)
• Modbus RTU
• Allen Bradley DF1 Full Duplex, Allen Bradley DF1 Half Duplex,
Allen Bradley PLC5 DF1, AB DH485
• Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
• GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
• Mitsubishi Melsec FX
• Siemens PPI
• Entivity Modbus RTU
• AutomationDirect GS Drives
• AutomationDirect SOLO Temperature Controllers
• Mitsubishi Q/QnA
Port 1
Port 2
DV-1000CBL
serial cable
CLICK PLC
C-more 6” STN
Micro-Graphic
Panel
R
R
L
ISTEDLISTED
7
M177M17
Date code:****Date code:****
55443322 11 R01.R01.
MADE IN CHINAMADE IN CHINA
EA1-S6MLW + serial numberEA1-S6MLW + serial number
MODEL:EA1-S6MLWMODEL:EA1-S6MLW
I
NPUT:12-24V 6.5WINPUT:12-24V 6.5W
IND.CONT.EQ.IND.CONT.EQ.
6 5 4 3 2 1
RJ12 serial
communications Port1
Pin Signal
1Logic GND
not used
RXD (232C)
TXD (232C)
2
3
4
5
+5 VDC
6Logic GND
81
15
9
Pin Signal
1 Frame GND
TXD (232C)
R
XD (232C)
F
uture
2
3
4
5Logic GND
Pin Signal Pin Signal
6LE
CTS (232C)
R
TS (232C)
R
XD+ (422/485)
7
8
9
10 RXD– (422/485)
11 TXD+ (422/485)
TXD– (422/485)
T
erm. Resistor
d
o not use
12
1
3
1
4
15 do not use
PLC 15-pin serial
communications Port2
RS-232 RS-232/422/485
Expansion
Connector
Communication Ports
INPUT:12-24V 6.5W Class2INPUT:12-24V 6.5W Class2
R
R
LISTEDLISTED
7M177M17
Date code:****Date code:****
55443322 11 R01.R01.
MADE IN CHINAMADE IN CHINA
EA1-T6CL + serial numberEA1-T6CL + serial number
MODEL:EA1-T6CLMODEL:EA1-T6CL
IND.CONT.EQ.IND.CONT.EQ.
81
15
9
Expansion
Connector
USB Type B
Programming Port1
PLC 15-pin serial
communications Port2
Pin Signal
1 Frame GND
TXD (232C)
RXD (232C)
Future
2
3
4
5 Logic GND
Pin Signal Pin Signal
6 LE
CTS (232C)
RTS (232C)
RXD+ (422/485)
7
8
9
10 RXD– (422/485)
11 TXD+ (422/485)
TXD– (422/485)
Term. Resistor
do not use
12
13
14
15 do not use
RS-232/422/485
EA1-T6CL
EA1-S6ML & EA1-S6MLW
C-more 6” STN Micro-Graphic Port 1 to
CLICK PLC Port 2
Pin Signal
1
Frame GND
T
XD (232C)
R
XD (232C)
F
uture
2
3
4
5 Logic GND
Pin Signal Pin Signal
6
LE
C
TS (232C)
R
TS (232C)
R
XD+ (422/485)
7
8
9
10 RXD– (422/485)
1
1 TXD+ (422/485)
T
XD– (422/485)
T
erm. Resistor
d
o not use
1
2
1
3
1
4
15 do not use
R
S-232/422/485
E
xpansion
Connector
R
R
I
ND.CONT.EQ.IND.CONT.EQ.
7
M177M17
MODEL:EA1-T4CLMODEL:EA1-T4CL
D
ate code:9048Date code:9048
M
ADE IN CHINAMADE IN CHINA
INPUT:12-24V 0.19-0.38AINPUT:12-24V 0.19-0.38A Class2Class2
E
A1-T4CLEA1-T4CL＋＋094018001094018001
5
5443322
1
1
R
**.R**.
PLC 15-pin serial
communications Port2
USB Type B
P
rogramming Port1
EA1-T4CL