Specifications

ManualsBrandsC-more micro ManualsComputer equipmentEA1-S6MLW

1 - 8 0 0 - 6 3 3 - 0 4 0 5

e11-54

Operator Interface

Volume 14

Providing power to the touch panel

1.) During operation, the panel functions in High-Power Mode when

Recommended power supplies are AutomationDirect part number

PSC-24-015 or PSC-24-030.

2.) C-more Micro-Graphic STN panels EA1-S6ML and EA1-S6MLW are

powered during programming from the PC through the USB to RS-

232 Programming Cable Assembly, EA-MG-PGM-CBL.

C-more Micro-Graphic TFT panel EA1-T6CL is powered during pro-

gramming through a USB A-to-B cable such as USB-CBL-AB6.

The panel will operate in Low-power mode when powered by the

PC and result in a dim screen.*

3.) Optionally, the C-more Micro-Graphic STN panels EA1-S6ML and

EA1-S6MLW can function in Low-Power Mode powered from most

AutomationDirect PLC’s RJ12 serial communications port. Use a DV-

1000CBL communications cable, or a DV-1000CBL communications

cable with a FA-15HD 15-pin HD DSub/RJ12 Adapter connected to

most AutomationDirect PLC’s 15-pin HD communications port

(DL06, D2-250-1 & D2-260) for Low-Power operation. See Chapter 6:

PLC Communications in the Hardware User’s Manual (P/N: EA1-

MG6-USER-M) for additional details. The panel will operate in low-

power mode when powered by the PLC. The C-more Micro-Graphic

TFT panel EA1-T6CL cannot be powered from a PLC.

LISTEDLISTED

7M177M17

Date code:****Date code:****

55443322

R01.R01.

MADE IN CHINAMADE IN CHINA

EA1-S6MLW + serial numberEA1-S6MLW + serial number

MODEL:EA1-S6MLWMODEL:EA1-S6MLW

INPUT:12-24V 6.5WINPUT:12-24V 6.5W

IND.CONT.EQ.IND.CONT.EQ.

Supply to Panel:

1 A @ 12 - 24 VDC

(10.8 - 26.4 VDC)

–

GND

Equipment

Ground

Recommended

DC Supply Fuse

750 mA fast acting,

ADC p/n AGC-75

6” Panel powered from a DC power source – wiring diagram

C-more 6” Micro-Graphic

Power Connection Wiring

EA1-S6ML or EA1-S6MLW powered from an AutomationDirect PLC

via communications cable

NOTE: Recommended DC power supply to power the C-more Micro-Graphic Panel,

AutomationDirect Part No. PSC-24-015 or PSC-24-030.

*NOTE: When the panel is powered through Port1, the screen brightness is diminished. For full

brightness, connect an external Class 2, 12-24 VDC power source to the panel’s power connection.

Low-Power Mode should be used during initial programming only. Connect an external Class 2,

12-24 VDC power source when the panel is installed in its application.

Power Supplied to Panel through Cable from AutomationDirect PLC RJ12 port:

RS-232C (p/n DV-1000CBL)

To PLC

RJ12 Port

To C-more

STN Micro-Graphic

Serial Port1

GND

TXD

GND

Wiring Diagram

RXD

+5 V

1 = Sig GND

2 = not used

3 = RXD

4 = TXD

= +5 VDC

6 = Sig GND

1 2 3 4 5 6

J12 6-pin

Phone Plug

(6P6C)

GND