Specifications
B10–39
Operator Interface
www.automationdirect.com/C-more-micro
PLC
Overview
DL05/06
PLC
DL105
PLC
DL205
PLC
DL305
PLC
DL405
PLC
Field I/O
Software
C-more
HMIs
Other HMI
AC Drives
Motors
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
TB’s &
Wiring
Power
Circuit
Protection
Enclosures
Appendix
Part Index
Providing Power to the Touch Panel
1.) During operation, the panel functions in High-Power Mode when powered by a minimum 1 Amp 12 - 24 VDC power source. Recommended
power supplies are AutomationDirect part number PSP24-024S or PSP24-024C.
2.) The C-more Micro-Graphic panel is powered during programming from the PC through the USB to RS-232 Programming Cable Assembly, EA-
MG-PGM-CBL. The panel will operate in Low-power mode when powered by the PC and result in a dim screen.*
3.) Optionally, the C-more Micro-Graphic panel can function in Low-Power Mode powered from most AutomationDirect PLC’s RJ12 serial communi-
cations port. Use a DV-1000CBL communications cable, or a DV-1000CBL communications cable with a FA-15HD 15-pin HD DSub/RJ12 Adapter
connected to most AutomationDirect PLC’s 15-pin HD communications port (DL06, D2-250-1 & D2-260) PLCs for Low-Power operation. See
Chapter 6: PLC Communications in the Hardware User’s Manual (P/N: EA1-MG6-USER-M) for additional details. The panel will operate in low-
power mode when powered by the PC.
R
LISTED
LISTED
7M17
7M17
Date code:****
Date code:****
5432
1
R01.
R01.
MADE IN CHINA
MADE IN CHINA
EA1-S6MLW + serial number
EA1-S6MLW + serial number
MODEL:EA1-S6MLW
MODEL:EA1-S6MLW
INPUT:12-24V 6.5W
INPUT:12-24V 6.5W
IND.CONT.EQ.
IND.CONT.EQ.
81
15
9
Supply to Panel:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
+
–
GND
Equipment
Ground
Recommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
Panel Powered from a DC Power Source – Wiring Diagram
C-more 6” Micro-Graphic
Power Connection Wiring
Power Supplied to Panel through Cable from Direct
Logic PLC RJ12 port:
DL05, DL105, DL205, DL350, DL450, H2-WINPLC
RS-232C (p/n DV-1000CBL)
To PLC
RJ12 Port
To C-more
Micro-Graphic
Serial Port1
6
4
GND
TXD
1
3
GND
Wiring Diagram
3
RXD
2
+5 V
1 = Sig GND
2 = not used
3 = RXD
4 = TXD
5 = +5 VDC
6 = Sig GND
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
1
GND
6
GND
1 2 3 4 5 6
RJ12 6-pin
Phone Plug
(6P6C)
1 = Sig GND
2 = +5 VDC
3 = RXD
4 = TXD
5 = not used
6 = Sig GND
4
5
RXD
TXD
+5 V
10 feet [3.0 m] Maximum
Panel Powered from an AutomationDirect DirectLOGIC PLC via
Communications Cable
NOTE: Recommended DC power supply to power the
C-more
Micro-Graphic Panel,
AutomationDirect
Part No. PSP24-024S or PSP24-024C.
*NOTE: When the panel is powered through Port1 from a connected PLC or PC, the screen brightness
is diminished because the panel is running in Low-Power Mode. For full brightness, connect an
external 12-24 VDC power source to the panel’s power connection. Low-Power Mode should be
used during initial programming only. Connect an external 12-24 VDC power source when the panel
is installed in its application.