Specifications

1-800-633-0405
B10–52
Operator Interface
Using the C-more Micro-Graphic Programming Software for project
development, the C-more Micro-Graphic panel can be connected to a PC
(personal computer) by using EA-MG-PGM-CBL, the USB-to-RS-232 cable
assembly.
• Connect the USB programming cable (included) from a USB port type A on the PC to the
USB type B port on the converter (included). Next connect the serial programming
cable from the converter’s RJ12 port to the panel’s RJ12 serial port. The panel receives
power from the USB port of the PC that it is connected to through the USB to RS-232
converter assembly.
Following are the minimum system requirements for running C-more
Micro-Graphic Programming Software, EA-MG-PGMSW, on a PC:
• USB port for project transfer from software to touch panel
• Personal Computer with a 333 MHz or higher processor (CPU) clock speed
recommended; Intel® Pentium/Celeron family, or AMD® K6/Athlon/Duron family, or
compatible processor recommended
• Keyboard and Mouse or compatible pointing device
• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution
(1024 x 768 pixels recommended) 64K color minimum
• 150 MB free hard-disk space
• 128 MB free RAM (512 MB recommended)
• CD-ROM or DVD drive for installing software from the CD or internet access to
download
• Operating System - Windows® XP Home / Professional Edition Service Pack 2,
Windows® 2000 with Service Pack 4 or Windows® Vista
User PC
USB
Cable
Serial
Cable
C-more
Micro-Graphic
Panel
PC to Panel Programming
Cable Assembly
(Includes serial & USB cables)
p/n EA-MG-PGM-CBL
USB to RS232
Converter
USB Connectivity
USB to RS-232 Programming
Cable Assembly
Part No. EA-MG-PGM-CBL
C-more Micro-Graphic
Computer Programming Connections
<--->
USB to RS-232 Converter Specifications
Part Number
EA-MG-PGM-CBL
Hardware
USB Interface
USB Specification Rev. 1.1
Connector: USB Type B jack to accept USB Type B cable plug
Serial Interface
RS-232 (EIA-232-E)
Connector: RJ12 phone jack 6p to accept RJ12 cable plug
Baud Rate
115.2 kbps Maximum
Input Voltage
5 VDC (Supplied thru serial interface cable.)
Power Consumption
50 mA (Does not include power to panel and/or bezel.)
Accessory Cables (included)
USB Cable
USB Type A plug to PC on one end, USB Type B plug to converter on other end, 0.30 m [1 foot] length (* Note)
Serial Cable
RJ12 phone plug connectors on both ends, 2.0 m [6.56 feet] length (* Note)
Physical
Dimensions
2.559” (W) x 1.417” (H) x 0.886” (D)
[65.0 mm x 36.0 mm x 22.5 mm]
Weight
1.06 oz. [30 g]
Environmental
See Micro-Graphic panel specifications at the beginning of this catalog section.
* Note: Maximum cable length for either the USB or serial cable should not exceed 2.0 m [6.56 feet] in length.
TxD
RxD
PWR
LED Status Indicators