Specifications

1-800-633-0405
B10–42
Operator Interface
C-more 6” Micro-Graphic PLC Communication
Protocols & Cabling Chart (cont’d)
PLC Compatibility & Connection Chart
PLC C-more 6” Micro-Graphic Panel
Family CPU Port & Type
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
**PLC Port Powered or
External DC Power Supply
External DC Power Supply
Using panel’s RJ12 port 1
Using adapter’s serial Port 2
15-pin D-sub - female
Protocol(s)
Supported
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
Direct LOGIC
DL305
D3-330 or
D3-340
D3-232-DCU
DB 25 pin
(female)
Direct
NET
EA-4CBL-2
RS-232
Direct
NET
EA-4CBL-2
RS-232
D3-422-DCU
DB 25 pin
(female)
Not Possible
Direct
NET
*See Note
RS-422
D3-340
Port 1
RJ11 - 4 pin
Direct
NET
OP-3CBL-1**
RS-232
Direct
NET
EA-3CBL
RS-232
Port 2
RJ11 - 4 pin
Direct
NET,
Modbus RTU
Direct
NET,
Modbus RTU
D3-350
Port 1
RJ12 - 6 pin
K-sequence,
Direct
NET
DV-1000CBL**
RS-232
K-sequence,
Direct
NET
EA-2CBL
RS-232
Port 2
DB 25 pin
(female)
K-sequence,
Direct
NET,
Modbus RTU
*See Note
RS-232
K-sequence,
Direct
NET,
Modbus RTU
EA-4CBL-2
RS-232
See Note
RS-422
D3-DCM
D3-350 only
Port 1
DB 25 pin
(female)
K-sequence,
Direct
NET,
Modbus RTU
*See Note
RS-232
Direct
NET
EA-4CBL-2
RS-232
*See Note
RS-422
Direct LOGIC
DL405
D4-430
Port 0
DB 15 pin
(female)
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
Port 1
DB 25 pin
(female)
K-sequence,
Direct
NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct
NET
EA-4CBL-2
RS-232
*See Note
RS-422
D4-440
Port 0
DB 15 pin
(female)
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
Port 1
DB 25 pin
(female)
K-sequence,
Direct
NET
DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence,
Direct
NET
EA-4CBL-2
RS-232
*See Note
RS-422
D4-450
Port 0
DB 15 pin
(female)
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
Port 1
DB 25 pin
(female)
K-sequence,
Direct
NET,
Modbus RTU
DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence,
Direct
NET,
Modbus RTU
EA-4CBL-2
RS-232
*See Note
RS-422
Port 3
DB 25 pin
(female)
Not Possible
K-sequence,
Direct
NET,
Modbus RTU
*See Note
RS-422
Port 2
RJ12 - 6 pin
K-sequence,
Direct
NET
DV-1000CBL**
RS-232
K-sequence,
Direct
NET
EA-2CBL
RS-232
D4-DCM
Port 1
DB 25 pin
(female)
K-sequence,
Direct
NET,
Modbus RTU
*See Note
RS-232
Direct
NET
EA-4CBL-2
RS-232
*See Note
RS-422
* Note: See the C-more 6” Micro-Graphic Hardware User Manual (P/N: EA1-MG6-USER-M), Chapter 6: PLC Communications, for wiring diagrams that
the user can use to construct their own cables. Available for download at www.automationdirect.com.
** Note: The PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen brightness is diminished and the
alarm beep will not function. Low-Power Mode should be used during initial programming only. Connect an external 12-24 VDC power
source when the panel is installed in its application. PLC Compatibility & Connection Chart continued on next page.